-49- h hitron universal input harmonic correction ac-dc open frame single & multiple output 100 watts internal switching power supplies hvp101 series features: accommodate universal ac sources pcb version format meet iec1000-3-2 harmonic correction meet universal safety standards emi meet cispr pub. 22 & fcc class b ce marking compliance general specification efficiency: typ. 75-80%. switching frequency: pfc ckt. 75k hz. pwm ckt. 170-180k hz. circuit topology: fixed frequency forward circuit. transient response: output voltage returns in less than 0.3ms following a 25% load change. safety standard: iec950/ul1950 class i. operating temperature: 0 to +50c under forced air flow for full load. storage temperature: -20 to +85c. temperature coefficient: 0.04% /c. cooling: at least 30 cfm direct forward air flow is required to achieve full rating power. construction: pcb format. power density: 5.6 watts / cubic inch. in application specification input specification input voltage: typ. 90-264vac with pfc. input connector: v-m connector & gnd tag. input frequency: 47-63hz. inrush current: typ. 29a@230vac. input current: typ. 1.3a @115vac, 0.65a @230vac. dielectric withstand: meet iec950. emi: meet cispr en55022 b & fcc class b. hold-up time: typ. 18-25ms @ 115vac & 230vac. power factor & harmonic correction: meet iec1000-3-2, pf typ. 0.97-0.99 @ full load. power ok: installed in vo1 & vo2. over temperature protection (otp): by ntc at quad output only. earth leakage: less than 0.75ma @230vac. output specification output voltage: see ratings chart. output current: see ratings chart. output connector: v-m connector. output wattage: typ. 100 watts. line regulation: typ. 0.1%. load regulation: main vo1 typ. 1-2%. aux. vo2 typ. 1-2% (magnetic amp.). aux. vo3 typ. 1-2% (magnetic amp.). aux. vo4 typ. 2-3% (p.r.). noise & ripple: typ. 1% peak to peak. ovp: built-in at main vo1 & aux.vo2 & vo3 (latch). remote sensing: available at vo1 & vo2. adjustability: available at vo1,vo2 & vo3. over current protection: built-in at all output. overload protection (olp): fully protected against output overload and short circuit at any output. consult the factory for olp setting.
-50- output voltage / current ratings chart mechanical dimensions: mm [inches] weight: 368.0g(12.97 oz.) input & output connectors pin assignments ac input single output dual output quad output assignment l n gnd vo1 dc com +vo1# p.ok vo1 vo2 dc com +vo1 # +vo2 # p.ok vo1 dc com vo2 vo3 vo4 vo1+ # vo2+ # vo1,2- # p. o k connector & pin # p1-3 p1-1 tab p2-6,7,8, 9,10,11 p2-1,2, 3,4,5 p2-13 p2-14 p2-9, 10,11 p2-6, 7,8 p2-1,2, 3,4 p2-13 p2-12 p2-14 p2-1,2, 3,4 p2-5,6 7,8 p2-9,10 p2-11 p2-12 p3-3 p3-4 p3-1 p3-2 mating connector: molex 5195 or 5239 series. dual output (under forced air flow) main vo1 @# aux. vo2 # model no. typ. volt. typ. volt. hvp101-d050e 12.0a +5.0v 6.0a +5.0v hvp101-d050i 12.0a +5.0v 4.0a +12.0v hvp101-d050k 12.0a +5.0v 3.0a +15.0v hvp101-d050d 12.0a +5.0v 8.0a +3.3v hvp101-d033i 15.0a +3.3v 4.0a +12.0v hvp101-d033k 15.0a +3.3v 3.0a +15.0v single output (under forced air flow) main vo1 @# model no. typ. volt. peak hvp101-s033200 20.0a 3.3v 25.0a hvp101-s050160 16.0a 5.0v 20.0a hvp101-s120085 8.5a 12.0v 9.0a hvp101-s150068 6.8a 15.0v 7.0a HVP101-S240042 4.2a 24.0v 6.0a hvp101-s280036 3.6a 28.0v 5.0a hvp101-s360028 2.8a 36.0v 4.0a hvp101-s480021 2.1a 48.0v 3.0a quad output (under forced air flow) main vo1 @# aux. vo2 @ # aux. vo3 @ aux. vo4 model no. typ. volt typ. volt typ. volt typ. volt hvp101-q050dii 12.0a +5.0v 6.0a + 3.3v 1.5a +12v 0.5a -12v hvp101-q050die 12.0a +5.0v 7.0a + 3.3v 1.5a +12v 0.5a - 5v hvp101-q050mii 10.0a +5.0v 1.5a +24.0v 1.5a +12v 0.2a -12v hvp101-q050kie 10.0a +5.0v 2.5a +15.0v 1.5a +12v 0.4a - 5v hvp101-q050kii 8.0a +5.0v 2.5a +15.0v 2.0a +12v 0.2a -12v symbol: " " ovp built-in. "@" adjustable . "#" remote sense. " " installed with post regulator. " " installed with magnetic amplifier. remark: peak output, less than 60 sec. with 10% duty cycle.
|
